wxpython for python 3.5

classic Classic list List threaded Threaded
8 messages Options
Reply | Threaded
Open this post in threaded view
|

wxpython for python 3.5

Juvenal Claros
hi to all.

somebody know about if there are wxpython for python 3.5

--
You received this message because you are subscribed to the Google Groups "wxPython-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
For more options, visit https://groups.google.com/d/optout.
Reply | Threaded
Open this post in threaded view
|

Re: wxpython for python 3.5

Vlastimil Brom
2016-05-20 19:37 GMT+02:00 Juvenal Claros <[hidden email]>:
> hi to all.
>
> somebody know about if there are wxpython for python 3.5
>
Hi,
there are development builds of the Phoenix ve rsion of wxpython,
which also support python 3.5
http://wxpython.org/Phoenix/snapshot-builds/

you have to identify the needed version of the "wheel" file whl for
you python version, operating system etc, e.g.

wxPython_Phoenix-3.0.3.dev2043+6aacc38-cp35-cp35m-macosx_10_6_intel.whl
wxPython_Phoenix-3.0.3.dev2043+6aacc38-cp35-cp35m-win32.whl
wxPython_Phoenix-3.0.3.dev2043+6aacc38-cp35-cp35m-win_amd64.whl

You can (re)install via pip from the command line, e.g. (with the correct path):

C:\myprogs\Python3\Scripts>pip3.5.exe install --upgrade
http://wxpython.org/Phoenix/snapshot-builds/wxPython_Phoenix-3.0.3.dev2043+6aacc38-cp35-cp35m-win32.whl

The phoenix version is not officially released yet, but it works very
well already for my usecases (you have to check bysed on your own
requirements, supported widgets etc., of course).

hth,
   vbr

--
You received this message because you are subscribed to the Google Groups "wxPython-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
For more options, visit https://groups.google.com/d/optout.
Reply | Threaded
Open this post in threaded view
|

Re: wxpython for python 3.5

Chris Barker - NOAA Federal
On Fri, May 20, 2016 at 1:05 PM, Vlastimil Brom <[hidden email]> wrote:
you have to identify the needed version of the "wheel" file whl for
you python version, operating system etc, e.g.

wxPython_Phoenix-3.0.3.dev2043+6aacc38-cp35-cp35m-macosx_10_6_intel.whl
wxPython_Phoenix-3.0.3.dev2043+6aacc38-cp35-cp35m-win32.whl
wxPython_Phoenix-3.0.3.dev2043+6aacc38-cp35-cp35m-win_amd64.whl

You can (re)install via pip from the command line, e.g. (with the correct path):

or you can do it with one step with pip:

python -m pip install --no-index --find-links=http://wxpython.org/Phoenix/snapshot-builds/ --trusted-host wxpython.org wxPython_Phoenix

(yes, it took me a while to figure out all those flags)

-CHB
 

--

Christopher Barker, Ph.D.
Oceanographer

Emergency Response Division
NOAA/NOS/OR&R            (206) 526-6959   voice
7600 Sand Point Way NE   (206) 526-6329   fax
Seattle, WA  98115       (206) 526-6317   main reception

[hidden email]

--
You received this message because you are subscribed to the Google Groups "wxPython-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
For more options, visit https://groups.google.com/d/optout.
Reply | Threaded
Open this post in threaded view
|

Re: wxpython for python 3.5

David Hughes

On Sunday, 22 May 2016 01:44:13 UTC+1, Chris Barker wrote:
On Fri, May 20, 2016 at 1:05 PM, Vlastimil Brom <<a href="javascript:" target="_blank" gdf-obfuscated-mailto="MSijBTQ6KAAJ" rel="nofollow" onmousedown="this.href=&#39;javascript:&#39;;return true;" onclick="this.href=&#39;javascript:&#39;;return true;">vlastim...@...> wrote:
you have to identify the needed version of the "wheel" file whl for
you python version, operating system etc, e.g.

wxPython_Phoenix-3.0.3.dev2043+6aacc38-cp35-cp35m-macosx_10_6_intel.whl
wxPython_Phoenix-3.0.3.dev2043+6aacc38-cp35-cp35m-win32.whl
wxPython_Phoenix-3.0.3.dev2043+6aacc38-cp35-cp35m-win_amd64.whl

You can (re)install via pip from the command line, e.g. (with the correct path):

or you can do it with one step with pip:

python -m pip install --no-index --find-links=<a href="http://wxpython.org/Phoenix/snapshot-builds/" target="_blank" rel="nofollow" onmousedown="this.href=&#39;http://www.google.com/url?q\x3dhttp%3A%2F%2Fwxpython.org%2FPhoenix%2Fsnapshot-builds%2F\x26sa\x3dD\x26sntz\x3d1\x26usg\x3dAFQjCNFz7m0C92fGvl2hYSNdKIadh4IrCA&#39;;return true;" onclick="this.href=&#39;http://www.google.com/url?q\x3dhttp%3A%2F%2Fwxpython.org%2FPhoenix%2Fsnapshot-builds%2F\x26sa\x3dD\x26sntz\x3d1\x26usg\x3dAFQjCNFz7m0C92fGvl2hYSNdKIadh4IrCA&#39;;return true;">http://wxpython.org/Phoenix/snapshot-builds/ --trusted-host <a href="http://wxpython.org" target="_blank" rel="nofollow" onmousedown="this.href=&#39;http://www.google.com/url?q\x3dhttp%3A%2F%2Fwxpython.org\x26sa\x3dD\x26sntz\x3d1\x26usg\x3dAFQjCNFLwpFHkO6M9SKFedItPRhcLGjX7A&#39;;return true;" onclick="this.href=&#39;http://www.google.com/url?q\x3dhttp%3A%2F%2Fwxpython.org\x26sa\x3dD\x26sntz\x3d1\x26usg\x3dAFQjCNFLwpFHkO6M9SKFedItPRhcLGjX7A&#39;;return true;">wxpython.org wxPython_Phoenix

(yes, it took me a while to figure out all those flags)

-CHB

 A thousand thanks for that Chris. I'd managed to install a snapshot build by explicitly naming the .whl file a week or two ago but now, no matter what I tried, I kept getting a response like

(env3.4) E:\PyDevSrc7\Dp710>python -m pip install --upgrade http://wxpython.org/Phoenix/snapshot-builds/wxPython_Phoenix-3.0.3.dev2043+6aacc38-cp34-cp34m-win32.whl

wxPython_Phoenix-3.0.3.dev2043+6aacc38-cp34-cp34m-win32.whl is not a supported wheel on this platform.

Your way worked perfectly. The only thing I needed to add was the --upgrade flag.

--
David Hughes
Forestfield Software

--
You received this message because you are subscribed to the Google Groups "wxPython-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
For more options, visit https://groups.google.com/d/optout.
Reply | Threaded
Open this post in threaded view
|

Re: wxpython for python 3.5

Chris Barker - NOAA Federal
On Mon, May 23, 2016 at 6:55 AM, David Hughes <[hidden email]> wrote:
python -m pip install --no-index --find-links=http://wxpython.org/Phoenix/snapshot-builds/ --trusted-host wxpython.org wxPython_Phoenix

 
(env3.4) E:\PyDevSrc7\Dp710>python -m pip install --upgrade http://wxpython.org/Phoenix/snapshot-builds/wxPython_Phoenix-3.0.3.dev2043+6aacc38-cp34-cp34m-win32.whl

wxPython_Phoenix-3.0.3.dev2043+6aacc38-cp34-cp34m-win32.whl is not a supported wheel on this platform.

that's a py3.4 wheel -- are you running 3.5 now? also win32 -- are you running win32 or win64? but letting pip figure that out for you is a better way to go
 
Your way worked perfectly. The only thing I needed to add was the --upgrade flag.

Ah yes -- you'll need that if you already have an older version installed. So the complete command is:

python -m pip install --upgrade --no-index --find-links=http://wxpython.org/Phoenix/snapshot-builds/ --trusted-host wxpython.org wxPython_Phoenix

 nice and short and simple....

:-)

-CHB



--

Christopher Barker, Ph.D.
Oceanographer

Emergency Response Division
NOAA/NOS/OR&R            <a href="tel:%28206%29%20526-6959" value="+12065266959" target="_blank">(206) 526-6959   voice
7600 Sand Point Way NE   <a href="tel:%28206%29%20526-6329" value="+12065266329" target="_blank">(206) 526-6329   fax
Seattle, WA  98115       <a href="tel:%28206%29%20526-6317" value="+12065266317" target="_blank">(206) 526-6317   main reception

[hidden email]

--
You received this message because you are subscribed to the Google Groups "wxPython-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
For more options, visit https://groups.google.com/d/optout.
Reply | Threaded
Open this post in threaded view
|

Re: wxpython for python 3.5

GadgetSteve


On 23/05/2016 17:34, Chris Barker wrote:

> On Mon, May 23, 2016 at 6:55 AM, David Hughes <[hidden email]
> <mailto:[hidden email]>> wrote:
>
>         python -m pip install --no-index
>         --find-links=http://wxpython.org/Phoenix/snapshot-builds/
>         --trusted-host wxpython.org <http://wxpython.org> wxPython_Phoenix
>
>  
>
>     /(env3.4) E:\PyDevSrc7\Dp710>python -m pip install --upgrade
>     http://wxpython.org/Phoenix/snapshot-builds/wxPython_Phoenix-3.0.3.dev2043+6aacc38-cp34-cp34m-win32.whl
>
>     wxPython_Phoenix-3.0.3.dev2043+6aacc38-cp34-cp34m-win32.whl is not a
>     supported wheel on this platform.
>     /
>
>
> that's a py3.4 wheel -- are you running 3.5 now? also win32 -- are you
> running win32 or win64? but letting pip figure that out for you is a
> better way to go
>  
>
>     //Your way worked perfectly. The only thing I needed to add was the
>     *--upgrade* flag.
>
>
> Ah yes -- you'll need that if you already have an older version
> installed. So the complete command is:
>
> python -m pip install --upgrade --no-index
> --find-links=http://wxpython.org/Phoenix/snapshot-builds/ --trusted-host wxpython.org
> <http://wxpython.org/> wxPython_Phoenix
>
>  nice and short and simple....
>
> :-)
>
> -CHB
>
>
>
Note if you have both Python 2 & 3 installed you will need pip3 rather
than pip, (I find that the current version doesn't build for me on python2).

I would also strongly recommend setting up and activating a virtual
environment when testing.
--
Steve (Gadget) Barnes
Any opinions in this message are my personal opinions and do not reflect
those of my employer.

--
You received this message because you are subscribed to the Google Groups "wxPython-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
For more options, visit https://groups.google.com/d/optout.
Reply | Threaded
Open this post in threaded view
|

Re: wxpython for python 3.5

David Hughes
In reply to this post by Chris Barker - NOAA Federal
On 23/05/2016 17:34, Chris Barker wrote:
that's a py3.4 wheel -- are you running 3.5 now?

No, I'm running Python 3.4 as I still want to be able to support Windows XP


On 23/05/2016 17:47, Steve Barnes wrote:
I would also strongly recommend setting up and activating a virtual
environment when testing.

My different versions, both 2.7 and 3.4,  are inside their own virtual environments
-- 
Regards

David Hughes
Forestfield Software

--
You received this message because you are subscribed to the Google Groups "wxPython-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
For more options, visit https://groups.google.com/d/optout.
Reply | Threaded
Open this post in threaded view
|

Re: wxpython for python 3.5

Chris Barker - NOAA Federal
In reply to this post by GadgetSteve
On Mon, May 23, 2016 at 9:47 AM, Steve Barnes <[hidden email]> wrote:
Note if you have both Python 2 & 3 installed you will need pip3 rather
than pip, (I find that the current version doesn't build for me on python2).

yeah -- I was assuming a modicum of pip awareness :-)

but note that I suggested:

python -m pip install ......

which assures that you get the the pip associated with "python" -- if you have py2 and py3, you may want:

python3 -m pip .....


-CHB



 

I would also strongly recommend setting up and activating a virtual
environment when testing.
--
Steve (Gadget) Barnes
Any opinions in this message are my personal opinions and do not reflect
those of my employer.

--
You received this message because you are subscribed to the Google Groups "wxPython-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
For more options, visit https://groups.google.com/d/optout.



--

Christopher Barker, Ph.D.
Oceanographer

Emergency Response Division
NOAA/NOS/OR&R            (206) 526-6959   voice
7600 Sand Point Way NE   (206) 526-6329   fax
Seattle, WA  98115       (206) 526-6317   main reception

[hidden email]

--
You received this message because you are subscribed to the Google Groups "wxPython-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
For more options, visit https://groups.google.com/d/optout.